Mianyang Baoheng New Material Technology Co.,Ltd
Quality Solutions. Trusted Partners.
Add to Cart
PH15-7Mo Turbine Blade Steel AISI 632 UNS S15700
Description
PH15-7Mo Turbine Blade Steel AISI 632 UNS S15700 features high strength and elasticity while maintaining good plasticity and weldability, hence, PH15-7Mo Turbine Blade Steel AISI 632 UNS S15700 is widely used in air compressors for intake and exhaust valves, thermostats, springs, etc.
All of PH15-7Mo Turbine Blade Steel AISI 632 UNS S15700 used most often in the conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
PH15-7Mo Turbine Blade Steel AISI 632 UNS S15700
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.09 Si (％): ≤ 1.00 Mn (％): ≤ 1.00 P (％) ≤: 0.040 S (％) ≤: 0.030 Cr (％): 14.0 ~ 16.0 Ni (％): 6.50 ~ 7.70 Mo (％): 2.00 ~ 3.00 Al (%): 0.75 ~ 1.50 | Condition: annealed Tensile strength, σb/≥ MPa: 1035 Yield strength, σ0.2/≥ MPa: 450 Elonghation, δ ≥(％): 25.0 Reduction of area, ф ≥ (％): - Hardness | HB: - |
Applications:
PH15-7Mo Turbine Blade Steel AISI 632 UNS S15700 used most often in the Pipe, spring, diaphragm; Ship shaft, compressor disk; Reactor components; Structural parts such as various chemical equipment, etc.
| Technical Standard | Equivalent Grade |
| ISO/TS 15510(2003) | X6Cr13 |
| JIS G4303(2005) | SUS 405 |
| KS D3706(2006) | STS 405 |
| IS 6527(2001) | X04Cr13 |
| DIN EN 10088-1(2005) | X6Cr13/1.4000 |
| NF EN 10088-2(2005) | X6Cr13 |
| NF A35-573(1984) | Z6CA13 |
| BS 970-1(1996) | 403S17 |
| ASTM A959(2004) | 405/S40500 |
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.