Mianyang Baoheng New Material Technology Co.,Ltd
Quality Solutions. Trusted Partners.
Add to Cart
Aircraft steel D6AC Turbine Blade Steel
Description
Aircraft steel D6AC Turbine Blade Steel is a medium carbon, low alloy steel. Alloy D6AC has ultra high strength and is designed for use in high strength structural applications. Aircraft steel D6AC Turbine Blade Steel also is know for its high yield strength to tensile strength ratio, combined with good ductility. Due to Aircraft steel D6AC Turbine Blade Steel deep hardening characteristics it makes it applicable for fairly large sections.
All of Aircraft steel D6AC Turbine Blade Steel conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
Aircraft steel D6AC Turbine Blade Steel
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): 0.42 ~ 0.48 Si (％): 0.15 ~ 0.35 Mn (％): 0.60 ~ 0.90 P (％)≤: 0.015 S (％)≤: 0.015 Cr (％): 0.90 ~ 1.20 Ni (%): 0.40 ~ 0.70 Mo (％): 0.90 ~ 1.10 V (%): 0.05 ~ 0.10 | Condition: Heat treatment - Austenitized at 900℃ . Oil quenched and air cooled, or salt quenched at 205 ~ 220 ℃ for 10 minutes and air cooled Tensile strength σb≥/MPa: 1520.0 Yield strength σs≥/MPa: 1422.0 Elongation δ5≥(%): 9.0 AKV≥/J: - Hardness HRC: 45 Working pressure /MPa: 932.0 Bursting pressure /MPa: 1275.0 |
Applications:
Aircraft steel D6AC Turbine Blade Steel has many structural and defense applications. Aircraft steel D6AC Turbine Blade Steel martensitic used most often in thevehicle, airplane, pressure vessel, power generations, etc.
| Technical Standard | Equivalent Grade |
| ISO/TS 15510(2003) | X6Cr13 |
| JIS G4303(2005) | SUS 405 |
| KS D3706(2006) | STS 405 |
| IS 6527(2001) | X04Cr13 |
| DIN EN 10088-1(2005) | X6Cr13/1.4000 |
| NF EN 10088-2(2005) | X6Cr13 |
| NF A35-573(1984) | Z6CA13 |
| BS 970-1(1996) | 403S17 |
| ASTM A959(2004) | 405/S40500 |
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.