Mianyang Baoheng New Material Technology Co.,Ltd
Quality Solutions. Trusted Partners.
Add to Cart
ASTM 410 Turbine Blade Steel UNS S41000 Forging Piece AISI 410 AMS 5504 Bar
Description
Our company provides ASTM 410 Turbine Blade Steel Forging Piece UNS S41000 ESR refined Machined AISI 410 Forgings ASTM A959-2004.
All of ASTM 410 Turbine Blade Steel Forging Piece UNS S41000 ESR refined Machined AISI 410 Forgings ASTM A959-2004 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Packing details:
Products are well packed and clear labeled according to the regulations and customer's requests.
Intact packages are able to avoid any damage which might otherwise be caused during storage or transportation.
Products Details
ASTM 410 Turbine Blade Steel Forging Piece UNS S41000 ESR refined Machined AISI 410 Forgings ASTM A959-2004
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.15 Si (％): ≤ 1.00 Mn (％): ≤ 1.50 P (％)≤: 0.040 S (％)≤: 0.030 Cr (％): 11.5 - 13.5 Ni (％): ≤ 0.75 Mo (％): - | Tensile strength, σb/≥ MPa: 650 - 850 Yield strength, σ0.2/MPa: 450 Elongation, δ ≥(％): 15.0 Reduction of area, ф ≥ (％): 55.0 Hardness via heat treatment /HBW: 290 |
Applications:
ASTM 410 Turbine Blade Steel Forging Piece UNS S41000 ESR refined Machined AISI 410 Forgings ASTM A959-2004
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
| Technical Standard | Equivalent Grade |
| ISO/TS 15510(2003) | X12Cr13 |
| JIS G4303(2005) | SUS 410 |
| KS D3706(2006) | STS 410 |
| IS 6528(2001) | X12Cr13 |
| DIN EN 10088-2(2005) | X12Cr13/1.4006 |
| NF EN 10088-2(2005) | X12Cr13 |
| BS EN 10088-2(2005) | X12Cr13 |
| BS 970-1(1996) | 410S21 |
| ASTM A959(2004) | 410/S41000 |
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.