Mianyang Baoheng New Material Technology Co.,Ltd
Quality Solutions. Trusted Partners.
Add to Cart
ASTM A286 UNS S66286 Turbine Blade Steel ASTM A286 Round Bar UNS S66286 Flat Bar
Description
Our company provides ASTM A286 UNS S66286 Solution treated / Quenched and Tempered Turbine Blade Steel ASTM A286 AOD / VOD Round Bar UNS S66286 ESR refined Flat Bar.
All of ASTM A286 UNS S66286 Solution treated / Quenched and Tempered Turbine Blade Steel ASTM A286 AOD / VOD Round Bar UNS S66286 ESR refined Flat Bar. conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
ASTM A286 UNS S66286 Solution treated / Quenched and Tempered Turbine Blade Steel ASTM A286 AOD / VOD Round Bar UNS S66286 ESR refined Flat Bar.
| Chemical Composition (weight%): | C (％): ≤ 0.08 |
| Si (％): ≤ 1.00 | |
| Mn (％): ≤ 2.00 | |
| P (％)≤: 0.040 | |
| S (％)≤: 0.030 | |
| Cr (％): 13.5 ~ 16.0 | |
| Ni (％): 24.0 ~ 27.0 | |
| Mo (％): 1.00 ~ 1.50 | |
| Co (%): - | |
| W (%): - | |
| Ti (%): 1.90 ~ 2.35 | |
| Cu (%): ≤ 0.025 | |
| Al (%): ≤ 0.035 | |
| B (%): 0.0010 ~ 0.010 | |
| Mechanical Properties Under Final Heat Treatment: | Condition / Bar: Solution treated, precipitation hardened |
| Tensile strength, σb/≥ MPa: 950 | |
| Yield strength, σ0.2/≥ MPa: 650 | |
| Elonghation, δ ≥(％): 12.0 | |
| Reduction of area, ф ≥ (％): - | |
| Hardness | HB: - |
Applications:
ASTM A286 UNS S66286 Solution treated / Quenched and Tempered Turbine Blade Steel ASTM A286 AOD / VOD Round Bar UNS S66286 ESR refined Flat Bar.Turbine engine parts - mechanical gears, gear shaft, main axis, blade,Mechanical parts - bolt and nut, fastener,Gas turbine,Turbine blade
Equivalent Grade
ASTM A286
UNS S66286
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of ASTM A286 UNS S66286 Turbine Blade Steel ASTM A286 Round Bar UNS S66286 Flat Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.