Mianyang Baoheng New Material Technology Co.,Ltd
Quality Solutions. Trusted Partners.
Add to Cart
A286 Turbine Blade Steel AISI 660 1.4980 Round Bar X6NiCrTiMoVB25-15 Bar S66286 Flat Bar
Description
Our company provides A286 AISI 660 Turbine Blade Steel DIN 1.4980 Round Bar UNS S66286 Flat Bar X6NiCrTiMoVB25-15 Bar.
All of A286 AISI 660 Turbine Blade Steel DIN 1.4980 Round Bar UNS S66286 Flat Bar X6NiCrTiMoVB25-15 Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
A286 AISI 660 Turbine Blade Steel DIN 1.4980 Round Bar UNS S66286 Flat Bar X6NiCrTiMoVB25-15 Bar
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.08 Si (％): ≤ 1.00 Mn (％): ≤ 2.00 P (％) ≤: 0.040 S (％) ≤: 0.030 Cr (％): 13.5 ~ 16.0 Ni (％): 24.0 ~ 27.0 Mo (％): 1.00 ~ 1.50 Co (%): - W (%): - Ti (%): 1.90 ~ 2.35 Cu (%): ≤ 0.025 Al (%): ≤ 0.035 B (%): 0.0010 ~ 0.010 | Condition / Bar: Solution treated, precipitation hardened Tensile strength, σb/≥ MPa: 950 Yield strength, σ0.2/≥ MPa: 650 Elonghation, δ ≥(％): 12.0 Reduction of area, ф ≥ (％): - Hardness | HB: - |
Applications:
A286 AISI 660 Turbine Blade Steel DIN 1.4980 Round Bar UNS S66286 Flat Bar X6NiCrTiMoVB25-15 Bar
Fuel nozzle
Heat treatment furnace flask and components, especially in the carbonization.
These materials must stand up to high heat, extreme oxidation potential and recycling.
Heat treating fixture
Furnace muffle
Nuclear reactor
Turbine engine parts - mechanical gears, gear shaft, main axis, blade
Mechanical parts - bolt and nut, fastener
Gas turbine
Turbine blade
Equivalent Grade
ASTM A286
X6NiCrTiMoVB25-15
AMS 5734/5737/5732
UNS S66286
AISI 660
DIN 1.4980
Suppliers ASTM A286 Stock, X6NiCrTiMoVB25-15 Forgings,AMS 5734/5737/5732 Inventory,Stocklist UNS S66286 Suppliers, Inventory AISI 660 Forgings,DIN 1.4980 Stock, ASTM A286 Suppliers, X6NiCrTiMoVB25-15 Inventory,ss AMS 5734/5737/5732 Stock, SS UNS S66286 Suppliers, DIN EN 10088-1(2005) DIN 1.4980 Forgings
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.