Mianyang Baoheng New Material Technology Co.,Ltd
Quality Solutions. Trusted Partners.
Add to Cart
ASTM 321 Stainless Steel Round Bar S32100 Round Bar X6CrNiTi 18-10 1.4541 Bar
Description
Our company provides ASTM 321 Stainless Steel Round Bar UNS S32100 Round Bar X6CrNiTi 18-10 1.4541 Bar ASTM A959-2004.
All of ASTM 321 Stainless Steel Round Bar UNS S32100 Round Bar X6CrNiTi 18-10 1.4541 Bar ASTM A959-2004 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
ASTM 321 Shot blasted Stainless Steel Round Bar UNS S32100 Ground Round Bar X6CrNiTi 18-10 1.4541 Peeled, Bar ASTM A959-2004
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.08 Mn (％): ≤ 2.00 Si (％): 0.25 ~ 1.00 P (％)≤: 0.040 S (％)≤: 0.030 Cr (％): 17.0 ~ 19.0 Ni (%): 9.00 ~ 12.0 Ti (%): 5 X (C+N) ~ 0.70 N (%): ≤ 0.10 Mo (%): ≤ 0.75 Cu (%): ≤ 0.75 | Tensile strength, σb/≥ MPa: 515 Yield strength, σ0.2/MPa: 205 Elongation, δ ≥(％): 40.0 Reduction of area, ф ≥ (％): - Hardness via heat treatment /HBW: 269 |
ASTM 321 Shot blasted Stainless Steel Round Bar UNS S32100 Ground Round Bar X6CrNiTi 18-10 1.4541 Peeled, Bar ASTM A959-2004
| Technical Standard | Equivalent Grade |
| ASTM A959(2004) | 321/S32100 |
| BS 970-1(1996) | 321S31 |
| BS EN 10088-2(2005) | X6CrNiTi 18-10 |
| NF EN 10088-2(2005) | X6CrNiTi 18-10 |
| DIN EN 10088-2(2005) | X6CrNiTi 18-10/1.4541 |
| KS D3706(2006) | STS 321 |
| JIS G4303(2005) | SUS 321 |
| ISO/TS 15510(2003) | X6CrNiTi 18-10 |
ASTM 321 Stainless Steel Round Bar UNS S32100 Round Bar X6CrNiTi 18-10 1.4541 Bar ASTM A959-2004
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of ASTM 321 Stainless Steel Round Bar UNS S32100 Round Bar X6CrNiTi 18-10 1.4541 Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.